Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver

You looking to find the "Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver" Good news! You can purchase Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $262.10   

Product Feature

• First Impact Tool with 3 speeds allowing the user to set the proper speed for a specific job
• First Impact Tool with an Electronic Clutch, Digital Readout, and Auto Shut-off
• First Impact Tool with Tighten (Snug-Up) Function, if the fastener is not fully set release, then pull the trigger again and it will tighen another 1/4, 1/2 or 3/4 turn depending on if it is a low, medium or high torque application
• Built in Belt Clip and LED light that turns on when the trigger is pulled a great feature for cabinet installation
• Includes Two High Capacity 3.5Ah Ni-MH Battery Packs

Product Description

Includes 12 Volt Cordless Impact Driver Kit with Digital Clutch - EY7202GQW-R, (2) High Capacity 3.5Ah Ni-MH Battery Packs, Belt Hook

Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver Review

I've been thinking about a cordless impact driver since they first hit the market a few years ago, but it was hard to justify when I have a Bosch 24 volt drill that will drive anything. Recently, however, I was driving lag screws in the confined space of a 105 degree attic as I was sistering new ceiling joists to the old ones. My wrist was about to fall off after the first joist. I borrowed a pneumatic impact driver from a friend, and it made the all the difference and convinced me that a cordless impact driver was a must. Turning to my favorite resource for tools, Amazon, I saw a killer deal on this Panasonic driver in combo with a drill and ordered it. It seems that the combo is not available now, but check Panasonic's website for rebates..they sometimes offer the drill body as a free promotion when you buy the impact driver.

Anyway, I love these tools! Like I said, my Bosch has the torque to drive anything, but it weighs a ton and so can be very difficult to handle unless you're working right in front of you...especially if you need to lean into it to driver a fastener without stripping the head. Not so with the Panasonic. It's very light and compact, and you only need to apply enough force to keep the bit in/on the fastener... the impact driver does the work of driving it. Some reviewers of other impact drivers have mentioned breaking off screw heads with their drivers, but the electronic clutch on this tool really works. You can set 11 (I think it's 11--don't have the tool in front of me) different torque levels, 3 different impact settings (soft, medium, hard), and there is a "one shot" feature that does just one impact when you pull the trigger and then it stops---great for snugging up a fastener. Once you've set the clutch, you pull the trigger and it spins until a little resistance is encountered, then the impact hammer goes to work, and finally the driver stops when it's reached the torque level you've set. If you're not happy with how the fastener is seated, it's easy to fine tune simply by feathering the trigger--it's very responsive. My only (very minor)complaint is that it's a little hard to make the bit turn slowly when you first pull the trigger, but I'm getting a better feel for it.

Contrary to what some reviewers think of them on other drivers, the LED light is useful. It's situated so it flashes on the fastener you're driving, and it's activated by the trigger. If you barely pull the trigger, it'll activate the light without turning the driver. Sure, 97% of the time I don't need the light, but for that 3% of the time that I'm hunched down in a cabinet or a crawlspace trying to drive a screw, why not??!! The belt hook is great feature too.

Since I got the combo, I have to say that I love the drill as well. I did some head-to-head comparisons with my Bosch boring holes, and while the Bosch ultimately wins in the torque department, the Panasonic is a close second. Considering the weight advantage, I'm going to sell my Bosch and I'll pull out a corded drill in the rare case that the Panasonic can't make the hole. The Panasonic's keyless chuck is different and superior to any others I've used.

I'm not aware of any other manufacturer offering a 3.5Ah NIMH battery, so that's another plus. Panasonic makes batteries for many other companies, so they know how it's done. I saw a review of another Panasonic impact driver that complained about the durability of the tool, but that's hard to imagine. These tools feel solid and built to last. Of course, time will tell, and I'll certainly post an update to this review should I encounter any troubles.

Most of the consumer Reviews tell that the "Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver" are high quality item. You can read each testimony from consumers to find out cons and pros from Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver ...